ABOUT THE UNGUATOR

Revolutionizing the pharmacy environment has been the main focus of the UNGUATOR® technology. Its aim has been to facilitate the preparation of many pharmacy, cosmetic, veterinary, and other formulations, in a fraction of the time and cost associated with conventional methods.

Its line of advanced sweep – wall mixing systems has accelerated formula developments and has increased overall production efficiency in preparation of compounding prescriptions, such as creams, gels, pastes, powders etc.

The UNGUATOR® product assortment also consists of a unique set of “push-up” jars that work specifically with its mixing devices.

While no single device can accommodate every formulation in the pharmacy, the use of the UNGUATOR® system offers an entire range of new compounds with consistent quality by replacing many of the traditional tools.

UNGUATOR® 2000

The UNGUATOR® 2000 employs four on-board microprocessors, which enable the user to operate the machine as a stand - alone device or, via serial port, with the UNGUATOR® Assist software from the PC.

All general mixing parameters are pre-set in the system, which allow the operator to concentrate more on raw materials and less on recipe specifics, leaving it up to the device to continually adjust the mixing settings.

Whether making creams, gels, ointments, powders, suspensions, emulsions, or other formulations, the UNGUATOR® 2000 fully automates and documents the once cumbersome blending process.

With the introduction of this model, laboratories and pharmacies are now able to prepare everything from the most intricate reaction mixing, at very slow speed, to bulk manufacturing, up to 1000ml. With a speed range starting as slow as 120 rpm and up to 2500 rpm, this model is not limited by low viscosities or other raw material properties.

Fully compatible with all current Unguator® products, the system quickly transforms any pharmacy into a fully capable compounding facility.

UNGUATOR® E/S

The UNGUATOR® e/s model features increased speed and volume ranges, programmable mixing parameters, and automatic jar oscillation. This unit allows the operator to program mixing requirements (time and mixing speed) into a display and operate the machine “hands free”, which also increases product quality of the finished preparation.

The unit has two modes of operation: HAND – the oscillation arm moves to its lower position, allowing the operator to manually control jar movement, and AUTO – the mixing Jar is screwed into the oscillation arm and the machine controls the oscillation by itself.

After the mixing program is finished, the machine enters into the free spin mode (FSL) automatically, in order to clean the standard blaeds blade from excess material. Jar sizes 300-500ml can be used with this model, allowing for some bulk preparations.

UNGUATOR® B/R

The UNGUATOR® B/R model locks the mixing blade shaft in a bayonet socket. This model easily operates with a variable speed control. Ideally suited for basic formulations and compounding from 15 to 200ml.

This basic model offers superior results in all small scale formulations by manual jar oscillation. Using one hand to hold the mixing jar to oscillate up and down, the other hand to control the speed control knob.

The time for preparation is dictated by the jar size in use. It is recommended that the mixing speed be brought to its highest level as quickly as possible for most formulations.